[Elecraft] K1ZTE - KAT500

[Alan - G4GNX]

Yes. You would normally 'train' the KAT500 in segments over each band 
for each antenna. This is done in Auto mode. The recommended segments 
are listed in the back of the KAT500 manual. Each match setting is 
stored in its own memory.
You would then leave the KAT500 in Manual mode and each time you 
transmit, it should detect the band/frequency and switch to the 
appropriate memory.

Memory settings are retained after power down.

73,

Alan. G4GNX


------ Original Message ------
From: "Ted Edwards W3TB" <w3tb.ted at gmail.com>
To: "KENT TRIMBLE" <k9ztv at socket.net>
Cc: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: 12/09/2020 23:22:48
Subject: Re: [Elecraft] K1ZTE - KAT500

>Related question:  Should the KAT-500 hold memorized settings after
>shutting down to ready for use another time?
>
>