[Elecraft] No Tx audio after WSJT upgrade

[Ian Kahn, NV4C]

Joe,

Check your WSJT-X settings and ensure you still have the correct sound 
card selected and that something didn't change your output target/radio 
selection. Also, if you're running Windows, make sure something else 
didn't change any of your sound card settings from what you had prior to 
upgrading WSJT-X.

73 de,

Ian, NV4C

On 9/11/20 11:23 PM, W8JH wrote:
> I was working FT8 tonight and decided to upgrade from WSJT 2.0 to the latest
> 2.2.
>
> Now I have no audio on transmit. All other functions work. Decodes, band
> change etc.
>
> It puts the K3s in transmit but no audio. I have adjusted the Mic gain
> without effect.
>
> I double checked that WSJT has the K3s codec for transmit selected.  Windoze
> shows it working as well.
>
> I’m totally stumped and wish I hadn’t upgraded now. Any ideas how to proceed
> ?
>
> 73,
>
>
>
> -----
> 73,
>
> Joe, W8JH
>
> K3s, KPA 500, KAT 500 and  KX3 happy user.
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nv4c.ian at gmail.com