[Elecraft] Follow up KXPA100 low power problem

[Nr4c]

I was not pleased with the original Elecraft supplied power cord either. I replaced it and never looked back. 

Sent from my iPhone
...nr4c. bill


> On Sep 7, 2020, at 11:03 PM, Terry Brown <n7tb at comcast.net> wrote:
> 
> I first want to thank all those who responded to my post.   In a follow up email it was suggested that I check for voltage drop in the Elecraft 12v fused power cord.   
> 
> Sure enough, at key down, voltage dropped from 14v to 10.5v.   I connected a 10ga power cord directly from my PS to the amp.  Voltage at key down was 13.72 volts and the amp put out full power.  
> 
> Time to troubleshoot the fused power cord!
> 
> 73,
> 
> Terry, N7TB 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com