[Elecraft] [K3] KAT3 not functioning on 6m

[Nr4c]

The K3 will allow Split in Data modes as well. But both VFOs must be in same Mode/sub mode first.  

Sent from my iPhone
...nr4c. bill


> On Sep 7, 2020, at 9:52 AM, w4sc <w4sc at windstream.net> wrote:
> 
> Bill,
> 
> The K3 only allows the “split” mode for SSB and/or CW  to be enabled, at least from panel.  Trying to enable split in any other mode, the VFO B window flashes “N/A”.   You may have different indications / results if the split command is sent via the CAT, and a mode other than CW or SSB is selected.
> 
> Ben W4SC
> 
> Sent from Mail for Windows 10
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com