[Elecraft] help with writing a macro for the KPA 1500

[Warren Merkel]

Howard,

Did you get your KPA1500 PF macros to work?  I use these all the time, 
doing exactly the same thing you want.

In the KPA1500 Utility, on the PF Keys tab, fill them in as:

PF1:    ^XI00;
PF2:	^XI30;

PF1 for K3 / K3S and PF2 for Flex.  I have Serial Speed XCVR set to 
38400 bps and have the USB Cables setup configured for the same speed.

Warren, KD4Z

On 10/25/2020 12:24 AM, elecraft-request at mailman.qth.net wrote:
> Message: 15
> Date: Sat, 24 Oct 2020 15:13:12 -0400
> From: Howard Sherer<hms4 at lehigh.edu>
> To: elecraft<elecraft at mailman.qth.net>
> Subject: [Elecraft] help with writing a macro for the KPA 1500
> Message-ID:
> 	<CAFmQ1mtXoJDH5TW4XjsypDxO_CSG8gFjCqufS2vR1MJOY3rrZg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> I am trying to write macros for the PF 1 & 2 keys for the KPA 1500.
> 
> My objective is:
> Have the PF1 button switch the Input to the K3s with the command ^PF1^XI0;
> Have the PF2 button change the input type to serial (for Flex) with the
> command ^PF2^XI3;
> 
> Neither one is working, where am I going wrong?
> 
> I assume that after I have these working with the command tested in the
> 1500 util, that saving them will send them to program the buttons on the
> 1500? Is this correct?
> 
> Howard