[Elecraft] KPA-1500: What is it telling me?

[Dick Dievendorff]

P 24 of the owner's manual near the bottom:

The ATU IN and the ATU BYP LEDs both illuminate to show the tuner is bypassed for this frequency.
When returning to the selected frequency, the internal ATU will recall the bypass mode, and both ATU IN and the ATU BYP LEDs will be illuminated.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of N4ZR
Sent: Sunday, October 25, 2020 14:47
To: Elecraft List <elecraft at mailman.qth.net>
Subject: [Elecraft] KPA-1500: What is it telling me?

I have a dummy load on Ant 2 on my KPA-1500.  When I have Ant 2 selected, on any bandI cannot select just "In."  When I hold the button to change ATU Mode, my only choices are BYP or BYP and IN both showing simultaneously.  What does the latter mean?

--
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to dick at elecraft.com