[Elecraft] help with writing a macro for the KPA 1500

[rocketnj at gmail.com]

To elaborate, the ^PF0 and ^PF1 are not valid commands. If you want to
string multiple commands on a button, each command must be followed by a
semicolon with no spaces.

Dave wo2x


-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Howard Sherer
Sent: Saturday, October 24, 2020 3:13 PM
To: elecraft <elecraft at mailman.qth.net>
Subject: [Elecraft] help with writing a macro for the KPA 1500

I am trying to write macros for the PF 1 & 2 keys for the KPA 1500.

My objective is:
Have the PF1 button switch the Input to the K3s with the command ^PF1^XI0;
Have the PF2 button change the input type to serial (for Flex) with the
command ^PF2^XI3;

Neither one is working, where am I going wrong?

I assume that after I have these working with the command tested in the
1500 util, that saving them will send them to program the buttons on the
1500? Is this correct?

Howard
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to rocketnj at gmail.com