[Elecraft] KPA500 Transformer

[Josh Fiden]

Yes. 100% of the time I’ve specified using a calibrated torque wrench or driver in an assembly procedure is to prevent *too much* torque from being applied. 

73
Josh W6XU

Sent from my mobile device

> On Oct 20, 2020, at 11:43 AM, Nr4c <nr4c at widomaker.com> wrote:
> 
>  No,  no. The torque wrench is used to insure the proper torque is applied. 
> 
> A torque wrench is not a torque multiplier, it is a measurement instrument. 
>