[Elecraft] extension of the length of the K3/KPA acc cable

[Rajiv Dewan]

The VGA cables are no good. Although they have 15 pins on each side, many are not through wired.  Many important pins are not connected at all, and some are shorted inside.

Raj

> On Oct 20, 2020, at 1:26 PM, Howard Sherer <hms4 at lehigh.edu> wrote:
> 
> I have the older style thick heavy cable from Elecraft for connection
> between the K3 and the KPA amp. It is just a little too short to fit my
> application. What is the best way to extend its length without  any pin
> conflicts to the missing pins? Can a standard VGA cable be used on the K2
> side?
> 
> Howard AE3T
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rdewan at me.com