[Elecraft] KPA1500 Using Multiple Antennas With the Tuner

[David Box]

Jim, If it is a manual switch then must be a short run from KPA to switch so why not connect to ANT1 ANT2 on KPA and switch with KPA.  KPA stores separate solutions for each ANT.
de Dave K5MWR 


On October 16, 2020 2:26:13 PM CDT, Jim McCook <w6ya at cox.net> wrote:
>Dave, yes, one coax from the amp to a manual switch.  Your question is 
>the same as mine.  Somehow the KPA1500 should know by sensing a rise in
>
>SWR and shutting down most of the drive power or output somehow so the 
>tuner can go through its motions without excessive output or a fault.
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to dobox at suddenlink.net 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.