[Elecraft] [K3] Issue with HI CUR on 12m

Alan - G4GNX g4gnx at g4gnx.com
Wed Oct 14 13:58:25 EDT 2020


No sweat Bill. Sh*t happens. :-D

73,

Alan. G4GNX


------ Original Message ------
From: "Bill Coleman" <aa4lr at arrl.net>
To: "Alan - G4GNX" <g4gnx at g4gnx.com>
Cc: "Elecraft" <elecraft at mailman.qth.net>
Sent: 14/10/2020 18:55:01
Subject: Re: [Elecraft] [K3] Issue with HI CUR on 12m

>In this case, it wasn’t RG-213, but RG-303. The author regrets the error.
>
>>  On Oct 14, 2020, at 1:45 PM, Alan - G4GNX <g4gnx at g4gnx.com> wrote:
>>
>>  Not wishing to pick a fight, but he said that he is using a balun rated at 1KW.
>>
>>  What you describe is a common mode choke and as I'm sure you know, that is not a transformer which is what I described.
>>
>>  I can see Jim's frustration. Folks really need to get to grips and properly understand the terms they are using, otherwise we get into meaningless arguments and false advice.
>>
>>  RG213 is a commonly used co-axial cable: https://www.awcwire.com/productspec.aspx?id=rg213-coaxial-cable
>>
>>  73,
>>
>>  Alan. G4GNX
>>
>>
>>  ------ Original Message ------
>>  From: john at kk9a.com
>>  To: elecraft at mailman.qth.net
>>  Sent: 14/10/2020 18:17:00
>>  Subject: Re: [Elecraft] [K3] Issue with HI CUR on 12m
>>
>>>  AA4LR is using #43 ferrite beads on RG-313 coax. I am not sure what  RG-313 is however there should be no ohm meter short unless he is  using a hairpin match.  Perhaps there is a flaky connection somewhere  in his system.  I had a lot of RF feedback problems with my K3S when  using a corroded station in the Caribbean but no current warnings.
>>>
>>>  John KK9A
>>>
>>>
>>>
>>>  Alan - G4GNX wrote:
>>>
>>>
>>>  I presume that you disconnected the feeder from the balun when you did
>>>  the DC Ohms test? If not, there is something wrong because you should
>>>  see almost a dead (DC) short through the primary of the balun.
>>>
>>>  I must admit I put off replacing my antenna until I was forced to. Might
>>>  be the way to go. :-)
>>>
>>>  73,
>>>
>>>  Alan. G4GNX
>>>
>>>
>>>  ______________________________________________________________
>>>  Elecraft mailing list
>>>  Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>  Help: http://mailman.qth.net/mmfaq.htm
>>>  Post: mailto:Elecraft at mailman.qth.net
>>>
>>>  This list hosted by: http://www.qsl.net
>>>  Please help support this email list: http://www.qsl.net/donate.html
>>>  Message delivered to g4gnx at g4gnx.com
>>
>>  ______________________________________________________________
>>  Elecraft mailing list
>>  Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>  Help: http://mailman.qth.net/mmfaq.htm
>>  Post: mailto:Elecraft at mailman.qth.net
>>
>>  This list hosted by: http://www.qsl.net
>>  Please help support this email list: http://www.qsl.net/donate.html
>>  Message delivered to aa4lr at arrl.net
>
>Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr at arrl.net
>Web: http://boringhamradiopart.blogspot.com
>Quote: "Not within a thousand years will man ever fly!"
>             -- Wilbur Wright, 1901
>



More information about the Elecraft mailing list