[Elecraft] K3s in a M/M HP environment question

[PAUL GACEK]

I operated over the weekend as W6E as one half of a M/M HP County Expedition in CQP.

I ran the SSB side of the show and N6MI the CW. Scott has the FTDX101.

We were both operating 500w into similar spec-ed 2 element beams on 20/15/10. We were about 300-500 ft apart.

I’m looking for advice on how to minimize the CW thump thump I would hear when we were both on the same band. It didn’t raise a HI SIG warning on the K3s but it was audible enough to distract me especial if an adjacent station was bleeding into my band.

Maybe the solution is a K3s setting, maybe filters (tough) or better separation.

Paul
W6PNG/M0SNA 
www.nomadic.blog <http://www.nomadic.blog/>