[Elecraft] K3 FT8 Levels Sanity Check
Joseph M. Durnal
joseph.durnal at gmail.com
Fri Nov 27 15:14:41 EST 2020
It has been doing well with the settings I posted. One of the schools of
thought is to use the most gain in the final stage, which should be the
line gain on the K3.
With the KIO3B the levels on the computer, Windows volume & Pwr slider in
WSJT-X should be known quantities. I suppose, OS & driver versions could
also make a difference. The last thing I want is a poor quality signal on
the band,
It can be tough when you are operating a temporary portable setup and you
don't have all your regular stuff or locals you know to get a good signal
report. I just wanted to do some casual operating while I stayed with my
grandmother and prepared for Thanksgiving & FT8 really fit the bill. Also
doing a little PSK31 here and there, which is pretty much the same
settings.
In a few hours, the mode will switch to CW for the rest of the weekend. I
hope 20 meters stays as open as it has been! Running QRP with an end fed
half wave at rooftop height, so, less than ideal, but looking forward to
getting on the air.
73 de Joe NE3R
On Thu, Nov 26, 2020 at 3:20 PM Bill Frantz <frantz at pwpconsult.com> wrote:
> Remember also, if the output level from the computer is too
> high, then it may not be possible to get the 4 bars steady, 5th
> flashing by adjusting the radio line in gain. This is because a
> change of one in the line in on the radio gives you either 4
> bars steady or 5 bars steady. Cutting down the levels from the
> computer will let you use more gain in the radio, getting to a
> place where the step size of the digital gain is smaller, giving
> finer control.
>
> 73 Bill AE6JV
>
> On 11/26/20 at 2:52 PM, jim at audiosystemsgroup.com (Jim Brown) wrote:
>
> >On 11/26/2020 1:43 AM, LDE wrote:
> >>Line In Gain = 40 seems too high to me.
> >
> >Numerical values are pretty much meaningless. The values cited
> >simply indicate that levels coming out of the computer are
> >fairly low, so more gain is needed in the Elecraft input stage.
> >
> >73, Jim K9YC
>
> -------------------------------------------------------------------------
> Bill Frantz | When it comes to the world | Periwinkle
> (408)348-7900 | around us, is there any choice | 150
> Rivermead Rd #235
> www.pwpconsult.com | but to explore? - Lisa Randall |
> Peterborough, NH 03458
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to joseph.durnal at gmail.com
>
More information about the Elecraft
mailing list