[Elecraft] P3 question

[Nr4c]

Make sure all connectors are firmly seated. 

Sent from my iPhone
...nr4c. bill


> On Nov 23, 2020, at 6:05 PM, Thaire Bryant <tbry441 at myfairpoint.net> wrote:
> 
> I just finished rewiring and rearranging my operating position (K3s, KPA1500 and P3) along with my station computer.  On reassembling I found that all was good except for the P3, I lost the signal display and the waterfall.  I have no problem connecting to the three utilities and all show up to date firmware. The P3 shows the center frequency (VFO A) and displays PEP and SWR.  I have rechecked all connections and all appear to be correct.  Any ideas?  I can not find any help in troubleshooting areas of manual or Fred Cary book.
> 
> Thanks & 73
> Thaire. W2APF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com