[Elecraft] KX3 CW keying problem

[Adrian]

Kent yes i did try that. I prefer Iambic A as Petr does, his experience 
is identical to mine.

I had tried iambic B previous to your advice with no change, and i don't 
use squeeze keying in any case. this is testing at 15 wpm.

The issue is random, and sometimes I can nearly get through a CQ without 
it messing up.

On my Yaesu rigs, same procedure, I have no issue and the send is 
perfect heard & tested with cwget monitor.

On the KX3  I can tap for a  dah and sometimes get a dit-dat-dit or 
dah-dit. When sending the 4 in my call I often get a dit after the last dah.

or a dah-dit on the T.

How the right paddle can produce a dit is beyond me. Left is set dit.

I have played with weight and delay settings also to no avail. Thankyou 
for your response.


73


Adrian Fewster

On 23/11/20 2:55 pm, K9ZTV wrote:
> Adrian ...
>
> Before taking any drastic measures, switch to the other Iambic mode from what you are currently using and see if that helps.   If using Iambic A, switch to Iambic B or vice-versa.  It’s in the CONFIG menu.
>
> 73,
>
> Kent  K9ZTV
>
>> On Nov 22, 2020, at 9:09 PM, Adrian <vk4tux at gmail.com> wrote:
>>
>> Petr, I have exactly the same issue here, seems to be with keyer, and I have
>> a new paddle from Elecraft
>>
>>
>>
>> Especially with the right dah key I have inadvertent dits generated before
>> and sometimes after a correct T send.
>>
>>
>>
>> I often get a R or N, and it is very annoying. I have tried FW reload and
>> stronger springs to no avail.
>>
>>
>>
>> It seems the KX3 keyer has a mind of its own and cannot generate clean cw.
>>
>>
>>
>> Let me know if you find a solution please ?
>>
>>
>>
>> 73
>>
>>
>>
>> A.Fewster
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> I've been using KX3 for some time now and still have some problems
>>
>> with CW keying. I'm using squeeze keying Curtis A. In the KX3 menu,
>>
>> there is selected A squeeze mode but during the QSO, it seems that the
>>
>> B is still enabled. The internal keyer very often adds dash, sometimes
>>
>> dot. It's horrible, because of that, I have to use an external keyer
>>
>> (TinyKeyer by Martin, OK1RR).
>>
>>
>>
>> It seems the problem is not with the paddle, I tried to use two
>>
>> paddles - Mercury N2DAN paddle from Bencher and Electraft Hexkey
>>
>> paddle. Still the same result. It's really annoying because when I
>>
>> operate from portable, I have to take care also about external keyer.
>>
>> What could be the problem? KX3 SN is 7742 with latest firmware
>>
>> installed.
>>
>>
>> Elecraft at mailman.qth.net
>> I love CW (HSC, CWOPS, FOC) and this keying issue is the only thing I
>>
>> don't like on my KX3.
>>
>>
>>
>> Thanks for your help
>>
>>
>>
>> 73 Petr, OK2CQR
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k9ztv at socket.net
>>
>