[Elecraft] CONFIG PTT-KEY Parameter

[Don Wilhelm]

Does the same thing happen if you disconnect the computer?

73,
Don W3FPR

On 11/19/2020 10:07 AM, w1ie at jetbroadband.com wrote:
> GM All,
> 
>   
> 
> I have something very unusual going on with both of my K3 radios. I set the
> CONFIG PTT-KEY parameter to RTS- DTR and the parameter does not change  when
> I go in and out to the CONFIG menu, nor does it change when I change bands.
> 
> If, however, I turn off the radio and then turn it back on, the  CONFIG
> PTT-KEY defaults (?) back to OFF - OFF. I am using the KIOB interface and
> the RS232 parameter is set to USB with the resultant COMPORT is COM5. When
> this started recently when I was having problems with MITTY and N!MM with
> AFSK RTTY and I had to turn off and on the radio several times to change
> some cables. Normally, I very seldom turn off the radio - meaning for the
> most part, It's on 24/7. I have looked through Elecraft's and Fred's
> documentation and I could not find any reference to "Oh, by the way, if you
> do or don't do this, then weird things could happen".
> 
> Has anyone else encountered this problem and if so, how did you solved it?
> 
>   
> 
>   
> 
> Best regards,
> 
>   
> 
> Jerry, W1Ie
> 
> .
> 
>   
> 
>   
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>