[Elecraft] KPA500+KAT500 interfacing.

[Don Wilhelm]

Wes,

The answer is NO.  The KAT500 and KPA500 take their AUX commands from 
the K3(S).

On 11/17/2020 1:11 PM, Wes wrote:
> I have a K3S interfaced to the KAT500 and KPA500 using the Aux cables.
> 
> If I was to replace the K3S with a rig with only RS232 control of the 
> KPA500, will the Kat500 still follow along using the Aux cables.  The 
> Xcvr and Amp connections on the KAT500 seem to be more or less a pass 
> through.
> 
> I know the KAT500 will switch using RF sensing, but that doesn't help in 
> a receive only situation, which I often employ.
> 
> Wes  N7WS
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com