[Elecraft] Using CM-500 with Elecraft Rigs
Jim Rhodes
jimk0xu at gmail.com
Sun Nov 8 22:03:24 EST 2020
Yes, what you said was " Kenwood, Yaesu and Ten-Tec transceivers do not
provide bias for an electret mic *at all*. To use an electret mic with
those transceivers one needs to install a "power adder"". Actually they do
provide bias to their own line of electret mics, so you could have been a
little more specific and said "for non-OEM mics". We can't tell what you
are thinking when you type.
On Sun, Nov 8, 2020 at 8:26 PM Joe Subich, W4TV <lists at subich.com> wrote:
>
> > NOT SO, DICK TRACY. All three manufacturers provide 5-10v bias
> > voltage on either Pin 2 or Pin 5, respectively - (and have done so for
> > many years.)
> >
>
> Read *ALL* of what I wrote. I indicated that the power is on pin 2
> (Kenwood) or 5 (Yaesu/Ten-Tec) but one had to add a 5K6 Ohm resistor
> and 1 uF blocking capacitor in order to use an electret mic. Those
> manufacturers do not provide "automatic" operation with the CM500
> or other electret mics.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2020-11-08 8:10 PM, JR wrote:
> > Joe, W4TV, said:
> > Kenwood, Yaesu and Ten-Tec transceivers do not provide bias for
> > an electret mic at all. To use an electret mic with those
> > transceivers one needs to install a "power adder" ...
> >
> > ________________________________________________
> >
> > NOT SO, DICK TRACY. All three manufacturers provide 5-10v bias
> > voltage on either Pin 2 or Pin 5, respectively - (and have done so for
> > many years.)
> >
> > Elecraft did operators a HUGE FAVOR by switching bias voltage ON and
> > OFF with a MENU setting, adding an bonus measure of flexibility (...
> > which is NOT to be corn-fused with any sort of Flex-able Radio! ...
> > after all, this is CHAOS and we don't do that here ... ) ;-) Elecraft
> > earned bonus points for providing BOTH an 8-pin Foster jack AND a pair
> > of 3.5 mm TRS jacks to accommodate all sorts of microphones and headsets
> > without a middle-man adapter on its larger models - way ahead of the
> > field. / K8JHR /
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
--
Jim K0XU
jim at rhodesend.net
More information about the Elecraft
mailing list