[Elecraft] Problems with KRX3A

[Grant Youngman]

Glad to hear you got it working.  But you shouldn’t be seeing a signifiant difference between the two receivers, unless something is set differently between them, or there’s another issue floating around.  

Grant NQ5T

> On May 31, 2020, at 12:36 PM, Gareth M5KVK <gareth.m5kvk at gmail.com> wrote:
> 
> Well, I’ve solved the initial problem. I stripped the rig back to its pre-KRX3A state and then re-installed: after checking performance.
> 
> I can only surmise that there was a poor connection somewhere, as basically all I did was re-installed some TMP cables.
> 
> The performance of the SUB is poorer than I would expect. It receives signals OK but at a considerably (more than -3dB) lower level.
> 
> 73
> 
> Gareth, M5KVK
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ghyoungman at gmail.com