[Elecraft] Problems with KRX3A
Gareth M5KVK
gareth.m5kvk at gmail.com
Thu May 28 11:34:32 EDT 2020
Thanks Mark
Sadly, Changing the CONFIG KRX3 to be ANT=ATU makes no difference.
Gareth
On 28/05/2020, 16:08, "Mark Musick" <markmusick at outlook.com> wrote:
HI Gareth,
Sorry, I sent my previous e-mail to you before seeing this one.
You have jogged my memory.
I still believe KRX3 ANT= ATU is correct, but what jogged my memory Gareth is I believe, and I'll have to check, is that if you have the ATU installed with the two antenna ports you can use the non-transmit port for a receive antenna. In other words if you have the ATU and have ANT1 selected as the transmit antenna you can select ANT2 for receive. It may be that setting is set to ANT2 when it should be ANT1. However, I believe the K3 is smart enough to know that ANT1 is the only one available when there is no ATU installed.
73,
Mark, WB9CIF
-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Gareth M5KVK
Sent: Thursday, May 28, 2020 14:53
To: Nr4c <nr4c at widomaker.com>
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Problems with KRX3A
Hi Bill
The documentation around this is a bit confusing, but my understanding is that this setting defines where the SUB gets its AUX antenna feed from. It can either be BNC (the Aux RF socket on the back panel), or (if you have the ATU installed and therefore two ANT sockets) it can get it from whichever ANT socket is not being used by MAIN. As I do not have ATU installed, the only option that works is bnc.
I can choose either MAIN or AUX ant for the SUB by pressing RX ANT
Does this make sense?
Gareth, M5KVK
On 28/05/2020, 14:03, "Nr4c" <nr4c at widomaker.com> wrote:
Sorry!
KRX3 Ant=bnc does not agree with both on MAIN.
Sent from my iPhone
...nr4c. bill
> On May 28, 2020, at 8:54 AM, Gareth M5KVK <gareth.m5kvk at gmail.com> wrote:
>
> I spent last evening checking the installation of the KRX3A. I did find one bit of incorrect plumbing (in the cables that connect the KRX3A to the rest of the K3S): however correcting it made no discernible difference.
>
> The post-installation setup instructions pass OK and all the CONFIG menu options seem to be correct: though it is difficult to be sure.
>
> With SUB on, SUB AF/RF at Max and Main AF at min: I get noise out of the speaker, but no signal: even though A and B are equal and the Main is definitely receiving a signal.
> CONFIG
> KRX3 Ant=bnc
> L-MIX-R A B
> SPKRS 1
> SUB AF nor
>
> Looks like an email to support is next.
>
> Gareth, M5KVK
>
> From: Gareth M5KVK <gareth.m5kvk at gmail.com>
> Date: Tuesday, 26 May 2020 at 16:05
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Problems with KRX3A
>
> Hi there
> I bought a s/h K3S a couple of years ago (SN 10901). It has a KRX3A installed, but I’ve never tried to use it until now. When I enabled the sub receiver this morning, I found I was getting no signal.
>
> I’ve checked various CONFIG settings and it’s set to use the MAIN ANT and it’s AF is independent of the K3S. In an attempt to make progress, I reviewed the installation instructions.
>
> Item 4, after enabling TECH MD, is Tap DISP and rotate VFO B to display SYN1 and SYN2. I do not see these items. Any idea how to debug this?
>
> 73
>
> Gareth, M5KVK
> ______________________________________________________________
> Elecraft mailing list
> Home: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056307492&sdata=Uo54AiGfy1m5ISLWyMpnApNSzZBOYfX25kdNs0mztTI%3D&reserved=0
> Help: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056307492&sdata=F74Vsiv1DxRfd9JHksPBhSXL17%2F4s0egq3SUy%2BetNlY%3D&reserved=0
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2F&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056307492&sdata=fg97KwBCsPu7v4bPQHXb1OXSF5s%2FGXcz0TSMgsXsNFo%3D&reserved=0
> Please help support this email list: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056307492&sdata=N0AqFb%2BOeCBuITpoOqjqbyGE%2FXPPwQbpar2sDgeXTEo%3D&reserved=0
> Message delivered to nr4c at widomaker.com ______________________________________________________________
Elecraft mailing list
Home: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056307492&sdata=Uo54AiGfy1m5ISLWyMpnApNSzZBOYfX25kdNs0mztTI%3D&reserved=0
Help: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056317483&sdata=KKSQsBY9oSKfy%2F6Ty5MHzyciBHU8lEGN2GHfFt11mcA%3D&reserved=0
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2F&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056317483&sdata=io1Awr3goeS7tsbYuTH1MGolJzUfA33A%2Ftj7p4mALeg%3D&reserved=0
Please help support this email list: https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=02%7C01%7C%7Cd6e946f34a374010f11e08d803171b5e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637262745056317483&sdata=yQw4SHIq%2BQFrgLtMbWwQY5b8f64B16Lu3muQoMiSxkc%3D&reserved=0
Message delivered to markmusick at outlook.com
More information about the Elecraft
mailing list