[Elecraft] Problems with KRX3A

[Richard Thorne]

Gareth,

You probably don't have the correct antenna port assigned to the sub 
receiver.  I'm not in front of my rig, but I believe you need to push 
and hold A/B (B Set) to get to the sub receiver, at that point be sure 
the correct antenna port is selected.

Rich - N5ZC

On 5/26/2020 10:05 AM, Gareth M5KVK wrote:
> Hi there
> I bought a s/h K3S a couple of years ago (SN 10901). It has a KRX3A installed, but I’ve never tried to use it until now. When I enabled the sub receiver this morning, I found I was getting no signal.
>
> I’ve checked various CONFIG settings and it’s set to use the MAIN ANT and it’s AF is independent of the K3S. In an attempt to make progress, I reviewed the installation instructions.
>
> Item 4, after enabling TECH MD, is Tap DISP and rotate VFO B to display SYN1 and SYN2. I do not see these items. Any idea how to debug this?
>
> 73
>
> Gareth, M5KVK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rthorne at rthorne.net