[Elecraft] KPA1500 PF Keys

[Jim McCook]

Jim, I just programmed my PF keys in the KPA1500 for fan speed 0 or 1.

Connect the USB cable to your computer from the KPA1500
Turn on the amp
Open the KPA1500 Utility program
Click on Configuration, then Edit Configuration
Click on the PF Keys tab at top
To set PF1 to fan speed 1 type *^FC1
*To set PF2 to fan speed 5 type *^FC5
*Click OK

Now press/hold PF2.  Fan speed should be 1.  PF2 should ramp up to 5.

The Programming Reference isn't so bad if you scroll down to the 
function you want to change.  It's pretty well spelled out.  This 
particular function, Minimum Fan Speed, was explained on page 24.

73, Jim
W6YA