[Elecraft] [K2] Serial number 00001

[Don Wilhelm]

Doug,

I have SN 00020 which is a field test model, and I suspect that it is 
not much different than Wayne's SN 00001.
The boards are relatively clean, and I do have all the FT mods (not 
many) plus all the K2 A to B mods installed.  Most of the FT mods were 
component value changes.
There are NOT a lot of jumpers and random capacitors.
Wayne does a lot of initial work using simulation, and as a result there 
are not a lot of extra cuts and adds.

73,
Don W3FPR

On 5/19/2020 10:19 AM, Douglas Hagerman via Elecraft wrote:
> It would be great to see a picture of the circuit boards of that radio!
> 
> Taking into account 20+ years of of ECOs and experimental mods, I am visualizing lots of jumpers and random capacitors…
> 
> Doug, w0uhu.
> 
> 
> Message: 8
> Date: Mon, 18 May 2020 12:43:36 -0700
> From: Wayne Burdick <n6kr at elecraft.com <mailto:n6kr at elecraft.com>>
> To: George P Linehan III <linehangp at me.com <mailto:linehangp at me.com>>
> Cc: Elecraft Reflector <elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net>>
> Subject: Re: [Elecraft] ISO Elecraft K2 QRP Or 100 watt.
> Message-ID: <82084FD4-08DE-404B-AE05-C29B578381A9 at elecraft.com <mailto:82084FD4-08DE-404B-AE05-C29B578381A9 at elecraft.com>>
> Content-Type: text/plain; charset=us-ascii
> 
> I have K2/10 S/N 00001, but I'm not sure I want to part with it.
>