[Elecraft] Prolly a dumb mistake... no internal speaker output

[Chuck Chandler]

I tried setting SPKRS = 1 with no change.

I plugged the two external speakers back in, and they are working normally.


On Sun, May 17, 2020 at 1:09 PM Ron Manfredi <wa2eio at optonline.net> wrote:

> Try the default for speakers; set it to "1"?
>
> Ron  WA2EIO
>
>
>
> On 5/17/2020 2:00 PM, Chuck Chandler wrote:
> > We are in the process of packing to move and I have to down-size the mess
> > on my operating desk.  As part of that the K3S was moved back and forth,
> > and I removed the two external speakers I had been using.
> >
> > Now that I've done that I get no audio when the headphones are unplugged
> > from the front jack.  The rear phones and speaker jacks are now empty.
> >
> > Menu CONFIG:SPKRS = 2
> > Menu SPKR+PH = no (but setting to YES doesn't make the internal speakers
> > work either)
> > PH.R SW is set to --
> >
> > I've looked at the manual and the Cady book, nothing jumps out at me.
> >
> > Any other buttons to push before I take the cover off?
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to chandlerusm at gmail.com



-- 
73 de Chuck, WS1L

chandlerusm at gmail.com