[Elecraft] KPA-500 Issues

[Bob McGraw K4TAX]

What is the SWR?  If above the KAT500 set value it inhibits the amp from being keyed.  Check the KAT500 using the ATU utility. 

Bob, K4TAX


Sent from my iPhone

> On May 15, 2020, at 1:50 PM, Jack Brindle via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> 
> Check the cable connections, including making sure that none of the pins are bent in the AuxIO connectors in both cables (K3S - KAT500, KAT500 - KPA500).
> Also, make sure that the PTT line is actually being asserted. The asterisk is displayed when the Key In is asserted. If it isn’t displayed that means the KPA is not seeing that input active. Also realize that when the KAT500 is in tune mode it blocks the key line going to the KPA.
> 
> It is fairly common for someone to move something and the cable comes loose. Be sure the screws are tightened down on the connectors and any adapters to avoid this.
> 
> 73!
> Jack, W6FB
> 
> 
>> On May 15, 2020, at 11:07 AM, Edward via Elecraft <elecraft at mailman.qth.net> wrote:
>> 
>> I have the combo K3S/KAT500/KPA500 with all of the optional interconnection cables. 
>> 
>> I am not able to key the amp though it was working earlier. The asterisk does not appear in the display. 
>> 
>> I went through the menu and everything is set accordingly. The inhibit is disabled. 
>> 
>> Any help would be appreciated. 
>> 
>> 73,
>> Ed NI6S
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jackbrindle at me.com 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net