[Elecraft] Frequency Display on PX3

[Nr4c]

Check cables. And connectors. Be sure they are plugged in completely. 

Sent from my iPhone
...nr4c. bill


> On May 13, 2020, at 9:34 PM, Mark Simon via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> I see photos of some PX3 screens where the span width markers (upper left and upper right) are frequencies.  Mine is showing -100.0 and +100.0 for a setting of 200.  I can’t seem to figure out how to change the display to show the frequencies.  I am running the latest firmware version for the PX3, 1.48.  I don’t know what version my hardware is, but the serial number is 1864 from May 2016. 
> 
> Anyone have any pointers on how to adjust to frequency display?   
> 
> Mark Simon
> wd9jen    @ aol.com
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com