[Elecraft] K3S -Low Audio Output

[Nr4c]

Nope.  O menu to activate buttons. Elecraft and Kenwood use same audio and PTT.  Buttons are on different pins.  Menu to turn Bias On/Off depending on mic used. 

Sent from my iPhone
...nr4c. bill


> On May 13, 2020, at 3:30 PM, Rick NK7I <rick.nk7i at gmail.com> wrote:
> 
> Kenwood, 8 pin round but use the K3/S menu to turn the 'button' feature off.
> 
> Rick NK7I
> 
> 
>> On 5/13/2020 11:53 AM, Jim Brown wrote:
>>> On 5/13/2020 11:43 AM, Edward via Elecraft wrote:
>>> I plugged in an Icom mic.
>> 
>> The three JA mfrs use the same mic connector but different pin connections, making them incompatible. Elecraft adapted one of them, don't recall which. Pinout is in Elecraft manuals.
>> 
>> 73, Jim K9YC
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rick.nk7i at gmail.com 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com