[Elecraft] height of k4 with legs extended

[Eric Norris]

I suggest you plan on having the K4 bail extended--in my station, the
KPA1500 blows hot exhaust air into my face without the bail extended, and
you will surely want a matching KPA1500 for your K4.  :-)  Of course, this
could be an artifact of my chair height, my height, and distance from
KPA1500.  YMMV.

73 Eric WD6DBM

On Thu, May 7, 2020, 2:32 PM Wayne Burdick <n6kr at elecraft.com> wrote:

> Precisely. Twins, in fact :)
>
>
> ----
> elecraft.com
>
> > On May 7, 2020, at 1:26 PM, Mike VE3YF <mike at ve3yf.com> wrote:
> >
> > Hoop:
> >
> > The height of just the front panel on the KPA1500 is  4 1/2" so looking
> at pictures of the K4 I am presuming the K4 has the same measurements as
> the KPA1500, that way the K4 sitting next to the KPA1500 they both would be
> perfect in height, much the same as the K3 and the P3 and the KPA500
> >
> > --
> >
> > *73 De Mike*
> > *VE3YF
> >
> > _/http://www.ve3yf.com/_*
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n6kr at elecraft.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to norrislawfirm2 at gmail.com
>