[Elecraft] KPA500 Remote Software will not pin to STARTUP list

[Lyn Norstad]

Frank -

I have both the KPA and KAT500 utilities set to do this, along with my
browser (Chrome) set to QRZ.com on one of my Win 7 systems.  It works
perfectly.

How To Start a Windows 7 Program Automatically (quoted from "dummies")

1 Click Start→All Programs. ...
2 Right-click the Startup folder and click Open. ...
3 Right-click Start and choose Open Windows Explorer. ...
4 Locate the program you want to start when you start Windows, then drag
into the Startup folder. ...
5 Click the Close button in the upper-right corner of both Explorer windows
to close them.
6 Reboot.

Note: This is not the same as "Pin To Start Menu."

73
Lyn, W0LEN


-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.
net] On Behalf Of VO1HPFrank
Sent: Thursday, May 07, 2020 5:31 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KPA500 Remote Software will not pin to STARTUP list

After a failed attempt to operate my remote KPA500 using a STARTECH serial
server I have reverted back to a PC at the site.  To streamline operations I
want the KPA remote software to start up when the PC is remotely booted. 
Right clicking and selecting Pin to Start does not work.  It does not appear
in the list of STARTUP programs.  KAT500 works Ok in STARTUP but not the
KPA500.

Does anyone know why?...or is there something else I need to do.  The PC
runs Win 7

Frank VO1HP



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lyn at lnainc.com