[Elecraft] CM500 headset on K3S and KX3?

[Grant Youngman]

Checked the manual.  It’s on the TIP connection of ACC2.  Set ACC2 IO in the menu to LO=PTT.

Grant NQ5T

> On May 5, 2020, at 11:06 PM, Grant Youngman <ghyoungman at gmail.com> wrote:
> 
> The ACC2 connector is a 2.5mm TRS connector, not 1/8” (3.5mm).   PTT is either on the tip or ring, I don’t recall which off hand — check the manual.
> 
> Grant NQ5T
> 
>> 
>> -- On the KX3, plug the headset's mike and phone plugs into the respective jacks, and use a momentary-contact switch on a mono-style 1/8" plug in the ACC2 jack as a manual PTT switch.
>>