[Elecraft] axt1 tripod

[1lasportsman 1lasportsman]

I made an adapter
I uses a flat aluminum bar with a hole drilled and tapped for the camera mount and then another hole with dnc adapter for coax and antenna.
Make short as possible fron tripod.
Bill
WF9M

> On March 31, 2020 at 5:16 PM rwwatson <richard.watson15425 at gmail.com mailto:richard.watson15425 at gmail.com > wrote:
> 
> 
>     Hello list,
>     I now almost have everything I need for my kx3 portable setup. I want to use
>     the ax1 with an axt1 adapter and my tripod has a removable camera plate
>     which seems to prevent the coax from attaching to the axt1. any suggestions
>     on a good tripod.
> 
> 
> 
>     --
>     Sent from: http://elecraft.365791.n2.nabble.com/
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net mailto:Elecraft at mailman.qth.net
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>     Message delivered to 1lasportsman at cox.net mailto:1lasportsman at cox.net
>