[Elecraft] Transceiver Test Bed at W3LPL

Barry barrylazar2 at gmail.com
Tue Mar 31 15:49:50 EDT 2020


Frank,
     I can't speak to the other radios, but you do need to fiddle the 
values of the AGC on the K3s to get the best out of the radios. I think 
the defaults are just to see if the radio works or is where it was left 
while undergoing QC at Elecraft.

BTW: I'm glad one of us is doing something worthwhile. ;-)

73,
Barry
K3NDM

------ Original Message ------
From: donovanf at starpower.net
To: elecraft at mailman.qth.net
Sent: 3/31/2020 3:39:44 PM
Subject: Re: [Elecraft] Transceiver Test Bed at W3LPL

>Hi Jim,
>
>
>Very good ideas! I'll also use my FTdx5000s as QRM radios and
>also try the K3s to see if the there is a measurable difference
>in QRM
>
>
>tks
>
>
>73
>Frank
>W3LPL
>
>----- Original Message -----
>
>From: "Jim Brown" <jim at audiosystemsgroup.com>
>To: elecraft at mailman.qth.net
>Sent: Tuesday, March 31, 2020 7:31:10 PM
>Subject: Re: [Elecraft] Transceiver Test Bed at W3LPL
>
>On 3/31/2020 10:44 AM, donovanf at starpower.net wrote:
>>  I welcome constructive comments about my test bed, test procedures and
>>  results.
>
>Hi Frank,
>
>A worthwhile experiment. Suggestions. Use dirtier QRM rigs. Low cost
>(less than FTDX5000) Yaesu rigs have lots of RF IMD on SSB, even when
>not badly adjusted. W4TV has documented the cause(s) of this within the
>radios. Also, set both QRM rigs and intended signal rigs for relatively
>high distortion audio. Also try intended signal rig with no low-cut EQ,
>no HF boost.
>
>73, Jim K9YC
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to donovanf at starpower.net
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to barrylazar2 at gmail.com



More information about the Elecraft mailing list