[Elecraft] [OT] Gap Width

[Bob McGraw K4TAX]

The thickness of 1 piece of 80# printer paper.   A single piece of those 
yellow post-it notes works equally as well.   I do this on my Vibroplex 
single lever and Iambic dual lever paddles.   I like a light touch on 
the paddles.   Spring tension is very important to the "feel".

I recently replaced the feed on both of mine.  In speaking with Scott at 
Vibroplex where I ordered my replacement feet, he indicated they 
typically only last 3 to 4 years before they start slipping around.

My experience, if one moves only their fingers when sending, this is 
correct.  If one moves their entire wrist to send, then I was advised to 
learn to send correctly.   Works for me.

73

Bob, K4TAX



On 3/28/2020 2:44 PM, Al Lorona wrote:
> Hi, Everybody,
>
> What do you set your gap width to on the contacts of your paddles? Is there an optimum gap width, or is it totally a personal preference?
>
> Because this is an off-topic post, if you reply to me please do it directly. Thanks!
>
> Regards,
>
> Al  W6LX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net