[Elecraft] K3 shift-width/lo-hi

[Nr4c]

64 F and overcast here in Williamsburg, Virginia right now. 

Sent from my iPhone
...nr4c. bill


> On Mar 28, 2020, at 10:24 AM, Martin Sole <hs0zed at gmail.com> wrote:
> 
>  Bill,
> 
> Many thanks, EE-Init seems to have done the trick, if for no other reason than it set default settings and restored the normal operation. Loading my saved configuration, saved after the problem occurred, created the same problem, no HI-Lo in SSB only on Data and AM.
> 
> I've now doe a full manual setup of all my filters and modules, I had that info to hand, and saved the current full working configuration.
> 
> So normal service is restored and the Hi-Lo function is once again working on all modes. Now I just need to brave the 38 degrees C to get outside and climb the tower to work on the antenna.
> 
> Many thanks Bill
> 
> 73
> Martin, HS0ZED
> 
> 
> 
>> On 28/03/2020 15:53, Nr4c wrote:
>> Look in manual for “EE_Init”. 
>> 
>> Is it set to Hi-Lo for SSB and Shift-Width for CW?   If so, why change it?
>> 
>> Sent from my iPhone
>> ...nr4c. bill
>> 
>> 
>>> On Mar 28, 2020, at 3:51 AM, Martin Sole <hs0zed at gmail.com> wrote:
>>> 
>>> HI,
>>> 
>>> So today having fun in WPX but playing with the K3 controls I am fairly sure that I should be able to change from shift-width to lo-hi by just a tap of either knob, but it does nothing. Well it does work as expected in Data and AM mode but not in CW or SSB. All other functions are normal and working as expected including the NORM and I/II switch functions. its just shift-width/hi-lo in CW and SSB modes only.
>>> 
>>> I've never needed to do this before but am scratching my head how to do a hard reset to default baseline settings, cannot find anything in the manual.
>>> 
>>> So what's going on? Have I set something that could disable this, and how can I achieve a clean test state to see what should or shouldn;t work.
>>> 
>>> 73
>>> Martin, HS0ZED
>>> 
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to nr4c at widomaker.com 
>