[Elecraft] K3 Utility vs macOS Catalina

[Jack Brindle]

That shouldn’t have been needed. The drivers have been built into the macOS since 10.9.

David, suggestions?

73,
Jack, W6FB


> On Mar 27, 2020, at 5:08 PM, Don Putnick <donnieput at gmail.com> wrote:
> 
> That didn't work. BTW when I got the KUSB yesterday I went to the FTDI
> website to download the drivers. The VCP installer wasn't able to mount, so
> I loaded the D2XX drivers. They do work with the KPA500 Utility.
> 
> On Fri, Mar 27, 2020 at 5:04 PM David Fleming <dflem at yahoo.com> wrote:
> 
>> Hi Don,
>> 
>> Are you seeing the K3 Utility menu at the top of the screen when you start
>> the app? If so, click Window -> Set To Default Position and see if that
>> helps. If not, we’ll have to try something else.
>> 
>> David, W4SMT
>> 
>> On Friday, March 27, 2020, 7:05 PM, Don Putnick <donnieput at gmail.com>
>> wrote:
>> 
>> 
>> Hi all,
>> 
>> I'm working with Rob at Elecraft on this, but I'm trying to gather more
>> data for us. When I open the K3 Utility under Catalina, nothing is
>> displayed. If I go down to the dock, right click on the utility, then
>> select "Show all windows", the utility main screen opens. BUT if I click on
>> the screen, it closes immediately. The KAT500 Utility works just fine, so I
>> don't think its the usb-to-serial cable or the driver. And the K3 Utility
>> works correctly under macOS Sierra. Anyone else experiencing this?
>> 
>> 73 Don NA6Z
>> 
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com