[Elecraft] K3 Audio

[David Olean]

In CONFIG,  set SPEAKER  to 1, then the next position SPKR+PH is set to 
OFF. That is how mine is set and it works just as you desire. I remember 
having similar problems. I hope I did not miss anything.

Dave K1WHS

On 3/27/2020 9:01 PM, w1ie at jetbroadband.com wrote:
> Hello All,
>
>   
>
> Here's hoping someone will take pity on me. I am not getting any audio out
> of my K3 when I remove the headphones from the front panel. The
> CONFIG:SPRK+PH is set to "NO". When I set the parameter to "YES" and I have
> the headphones plugged in then I get audio from both the headphones and the
> speaker. When I unplugged the headphones, the speakers still have audio. I
> use to have it set up that if the phones are plugged in, no speaker audio
> and then speaker audio when the phones are removed, but things happen and I
> do not know what it was. I tried loading a previous configuration but still
> no joy.
>
>   
>
> Is there help out there? I have been fooling with this all afternoon and now
> I am just at my wits end.
>
>   
>
> Best regards,
>
>   
>
> Jerry, W1IE
>
>   
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k1whs at metrocast.net