[Elecraft] A broken K3

[Don Wilhelm]

Dave,

HI RFI means the sensor on the RX antenna input is seeing a high level 
of RF.  If you are operating into an antenna, switch to a dummy load 
while you are troubleshooting.  It just might be a quirk of your setup, 
and if you have no RX Antenna connected, it could be a troubleshooting 
tool for you.

73,
Don W3FPR

On 3/24/2020 2:02 PM, David Olean wrote:
> 
> Thanks so much to all who responded.  One thing I did not mention is 
> that I get a "HI RFI" error message at times when I key the radio.  It 
> makes me wonder if there is something else wrong.
>