[Elecraft] KXUSB pinout

[M. George]

Is the same cable as you would use with the Elecraft XG3, take a look at
the end of the XG3 manual:
https://ftp.elecraft.com/XG3/Manuals%20Downloads/E740154%20XG3%20Owner%27s%20Manual.pdf

The tip(1) is TX and the Ring(2) is RX... and well you guessed it... the
Sleeve(3) is Ground. So on a DB9 (D-Sub) connector, pin 3 goes to the Tip,
Pin 2 goes to the Ring and Pin 5 to the Sleeve.

Max NG7M

On Tue, Mar 17, 2020 at 7:36 PM Mike Short <ai4ns.mike at gmail.com> wrote:

> I need the pinout for the KXUSB cable, and can't seem to find anything on
> Elecraft website.
> I need to make an adapter to use the KXUSB cable with a K3.
>
> Mike
> AI4NS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.matthew.george at gmail.com
>


-- 
M. George