[Elecraft] Per-Band Power Setting Issue

[Keith Onishi]

Do you set the proper drive level per band while KPA500 is in OPER mode?

How do you power off your K3S?
When POWER button is pushed for power-off, K3S saves the setting in internal non-volatile memory. Otherwise, any setting changes you made after powered on will be discarded.

73 de JH3SIF, Keith

> 2020/03/12 16:36、Tony <dxdx at optonline.net>のメール:
> 
> All:
> 
> I purchased the AUX cable for the K3S / KPA500 to use the per-band power option so the drive levels would stay put when the amp was in operation.
> 
> After setting the proper drive level for each band, I noticed that the settings I chose were lost if I turned the power up on the K3S.
> 
> I thought the per-band settings might go back to their presets if I cycled the KPA500 from operate to standby and back, but that didn't work.
> 
> If the per-band drive levels are easily bypassed, it defeats the whole purpose of having this option.
> 
> Am I missing something?
> 
> Tony
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jh3sif at sumaq.jp