[Elecraft] kx2 SSB always in TX
Michael Walker
va3mw at portcredit.net
Tue Jun 30 16:48:46 EDT 2020
Hi
No, nothing else plugged into the radio.
As for a 2nd Mic, not at this time and I am not at home near my workbench
which has lots of bits to try things. If I have time tonight, I will open
up the Mic and do some more tracing.
I think we have gone as far as we can go at this point given the tools I
have. I'll do more lab work on it when I get back home next week.
I got the internal mic to work as it should, so I can make do with that for
the time being.
thanks for your help.
73, Mike va3mw
On Tue, Jun 30, 2020 at 4:45 PM Don Wilhelm <donwilh at embarqmail.com> wrote:
> Mike,
>
> Solution unknown - either you have a bad mic plug on that MH3, or there
> is a problem with your KX2 mic jack.
> Do you know anyone else who has a KX2 or KX3 that could try your
> microphone?
>
> 73,
> Don W3FPR
>
> On 6/30/2020 3:02 PM, Michael Walker wrote:
> > Ops, missed that. I used shield ground, not logic ground.
> >
> > However, when I tested Ring 1 to Ring 2, it is open and then shorts
> > when you push the PTT button. This seems to be working as designed.
> >
> > I did confirm that mic is plugged in all the way and did a close
> > visual look at it to make sure.
> >
> >
>
>
More information about the Elecraft
mailing list