[Elecraft] KX2 Drift During Field Day

[Richard Corfield]

Are you talking about the output frequency as measured on another device?
Or the numeric readout on the radio's own display?

I've seen shifts in some situations on 2m, which I think was RF getting
into it. If you turn off Mic Up/Down button control maybe it will help
there.

I've had issues where I knocked the dial before. Oops.

 - Richard


On Mon, 29 Jun 2020 at 23:37, Ian Kahn, NV4C <nv4c.ian at gmail.com> wrote:

> All,
>
> I have KX2 s/n 2862. I noticed while operating Field Day that, about
> every 15 minutes, it would drift down 1 Hz. Has anyone else ever seen
> this in their KX2? I will admit it is possible this was just the effect
> of RF getting back into the rig, but at 10W, I'm not really sure where
> enough would come from to cause an issue.
>
> Thanks and 73,
>
> Ian, NV4C
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richard.corfield at gmail.com
>