[Elecraft] K3S and Micro Keyer II issue

[Don Wilhelm]

Pete,

Do you normally drive the audio to produce 4 bars solid with the 5th bar 
flashing?  That is often the problem with no or low RF output.

I do not have any answers on the Microkeyer II, someone else will have 
to respond to that.

73,
Don W3FPR


On 6/29/2020 10:16 AM, Peter Chamalian wrote:
> I'm running the K3S and Micro Keyer II.  When I go on digital there are
> times when the K3S appears to be putting out RF but there is none.  When I
> switch to CW all's well.
> 
> If I turn the K3S, Microkeyer II off and shut down the device router
> software then turn it all back on, I get RF out on digital.
>