[Elecraft] KX2 power cable polarity?

[Phil Kane]

On 6/27/2020 2:22 PM, hawley, charles j jr wrote:

> Measure which wire goes to the outside shell of the connector, that’s ground.

That's about the only way.  Unfortunately I have found two standards for
"zip cord" markings - white stripe on positive, and white stripe on
negative.  Your multi-meter is your friend.

73 de K2ASP - Phil Kane
Elecraft K2/100   s/n 5402

>From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon