[Elecraft] K2 after kat2 install Q7 & 8 check

[Don Wilhelm]

Russ,

Your statement of "no resistance" is misleading.  Several hams use that 
to indicate infinite resistance - because of the way their meter reads 
(blank reading) where in other cases, hams use that phrase to indicate 
zero ohms.
In the future, be clear and use a numerical value - infinity  is a 
numerical value.

The Collector to ground resistance will normally be in the vicinity of 
1500 ohms and climb as the meter charges the electrolytic capacitors.

73,
Don W3FPR

On 6/24/2020 11:35 AM, Russ Edelen wrote:
> Thanks Don. That confirms the notion I had about needing the 
> replacement kit.
>
> Russ
>
> KG7VQ
>