[Elecraft] [K3] RTTY Setup: Solutions

[Ian Kahn]

John,

Have you submitted these items as a bug report to the N1MM Logger+
developer team? I bet they would appreciate hearing about your issue.

73 de,

Ian, NV4C

On Sat, Jun 20, 2020, 6:00 PM John Reilly <reillyjf at gmail.com> wrote:

> Here are the solutions to my questions:
> 1. FSK/AFSK Mode - The solution was to set the RTTY mode in N1MM to AFSK
>
> 2. Intermittent failure to go to receive after transmit: There are at
> least three ways to setup the K3 and N1MM for RTTY AFSK PTT:
>      a. Use Serial RTS for PTT
>      b. Use "PTT via Radio Command Digital Mode"
>      c. Use VOX
> Note that you cannot use more than one of these at a time. FWIW, my RTTY
> N1MM macros do have {RX} at the end of each line.
> The first two did not solve my problem -- I still failed to return to RX
> about a third of the time; however, VOX appears to have fixed the
> problem. I wish I knew why the first two don't work.
>
> This is probably applicable to WSJTx PTT, too.
>
> Thanks to those who replied,
>    - 73, John, N0TA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nv4c.ian at gmail.com