[Elecraft] Future of KPA500 & KAT500

[Phil Hystad]

Why would you modify your KPA500 and risk warranty, repair, and clean signals for a mere 1/2 S-Unit at best?



> On Jun 18, 2020, at 9:27 AM, Gmail - George <gdanner12 at gmail.com> wrote:
> 
> Paula Keezer NX1P modified a KPA500 to allow it to be driven to about 500 
> watts by a KX3.
> She published it - but I can not find it on the web.
> The mod increased the gain by less than 3 db (seems I recall 2.something). 
> You would need the 12 to 15 watts to drive it to about 500 watts.
> 
> The modification involved removing the input pad and modifying the feed back 
> loop to the microprocessor.
> I thought about doing the mod to be able to run a net with my KX3 if my K3 
> quit.
> I have a KXPA and decided not to do the modification.
> I can just remove my KX3 & KXPA from my truck if I ever need a backup to 
> drive the KPA500. Probably 10 minutes work and find the bag of portable 
> cables.
> 
> BTW - Ms. Keezer's modification was very detailed and she had many cautions 
> regarding doing the modification.
> It defiantly was not a matter of "cutting a jumper" to remove the input pad. 
> You need remove the pad parts and change the number of turns in a 
> transformer.
> 
> Defiantly would void the warranty and make factory repairs iffy depending on 
> Elecraft's policies.
> Other manufacturers  I have worked with would restore the amp to factory 
> while repairing it.
> 
> As a ham you are not limited to the 15 db gain restriction - the 
> manufacturer is but not you.
> 
> 73
> George AI4VZ
> 
> -----Original Message----- 
> From: Charlie T
> Sent: Thursday, June 18, 2020 9:06 AM
> To: 'Nr4c'
> Cc: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Future of KPA500 & KAT500
> 
> Isn't there some sort of "jumper" or ???, that will increase the gain to 
> something other than the ridiculous and prohibitive +13 dB figure,  for 
> "international" (wink-wink) sales, sorta like the "MARS" mod in almost all 
> radios these days?
> 
> 99.9% of the chicken band users today are happy with their 5 watt radios.
> However, that restrictive and useless  +13 gain law does NOTHING to stop the 
> REALLY big guns on 27.025 who typically run amps using tubes that have 
> HANDLES on them!
> (I've personally seen channel 6 mobile set-ups running power in excess of 25 
> kilowatts.)
> 
> 73, Charlie k3ICH
> 
> 
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On 
> Behalf Of Nr4c
> Sent: Wednesday, June 17, 2020 3:14 PM
> To: Paul Gacek <w6png at yahoo.com>
> Cc: Don Putnick <donnieput at gmail.com>; Elecraft Reflector 
> <Elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] Future of KPA500 & KAT500
> 
> The KAT500 has three antenna out ports. It only needs one In so the KPA500 
> needs only one out port.
> 
> As for the 10 W in and 500 out idea.  That is prohibited by law. They’re 
> only allowed to sell an amp with max gain of 13dB.
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gdanner12 at gmail.com 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to phystad at mac.com