[Elecraft] MFJ 1234

Kenneth Christiansen w0cz at i29.net
Sun Jun 14 16:44:03 EDT 2020


Turning on the K3S is the one problem I have. I have to make sure it is on when I go. I would need another program to apply a ground momentarly to a pin of the K3S. I know there are programs that can do that but in my case it is not worth it to me to do it.  If the home AC blinks than I am off the air until I get home. I could make a delay timer to apply a ground pulse say in about an hour after the power returns or some kind of remote pulse for my land line but ???
Sorry 

Ken W0CZ.   w0cz at vi29.net

Sent from my iPhone

> On Jun 14, 2020, at 1:17 PM, NS9I WI <ns9i at bayland.net> wrote:
> 
> How do you turn the K3S on?
> 
> t u 73 Dwight NS9I
> 
>> On 6/14/2020 12:28 PM, Kenneth Christiansen wrote:
>> Hi Jim
>> I bought a 1234 in March of 2020.
>> I am using this iPhone 10 XR and NO-IP to control it from remote locations. CW worked right away and SSB needed three menu changes to the K3S. The monitor for SSB must be set to minimum, MIC+LIN must be set to off and MIC SEL must be set to LInE In.
>> I have checked into the Sunday morning 160 meter net remotely and everyone says it sounds fine.
>> One thing I like a lot is the 15 macros I have been able to write into the 1234 to allow me to make changes remotely in the event I forget to do it before I go.  I work 160 SSB and CW on 80 - 10. I can change antennas on the K3S and tune them from the remote. 160 uses a dipole and the rest of the bands a vertical. Good luck. I had another remote but quit using it years ago because I had to always change several cables and it did not have many Macros. This one lets me change and get on the air anyplace with my phone as long as the K3S is on.
>> Ken W0CZ.   w0cz at i29.net
>> Sent from my iPhone
>> 
>>>> On Jun 14, 2020, at 11:01 AM, James Holohan <holohaj2 at hotmail.com> wrote:
>>> 
>>> Hi.
>>>     Just wondering if anyone has used the MFJ 1234 Server with a K3S? I'm thinking of purchasing one but I'd like to hear from anyone with experience of using it.
>>> Jim EI4HH
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wocz at i29.net
>>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ns9i at bayland.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wocz at i29.net


More information about the Elecraft mailing list