[Elecraft] KX3 volume control inop
Don Wilhelm
donwilh at embarqmail.com
Sat Jun 13 11:41:28 EDT 2020
Jerry,
Can you change the monitor/sidetone level? How about the RF Gain?
If not, check the ribbon cable inside - unplug and reseat.
If still no solution, it is possible you have a bad encoder.
73,
Don W3FPR
On 6/13/2020 11:14 AM, Jerry Ford wrote:
> Good morning all:
>
> I'm having a rough day today and I need some advise.
>
> Got my KX3 out this morning to work WES and found
> the volume control is not working. My volume is maxed
> at 46 on the display and I can not turn it down. Pushing
> the knob does change it from AF to RF and holding it
> down does change to monitor. Volume dose nothing.
>
> The radio has been stored for some time inside a Pelican
> case. I hooked it to my power supply with 13.8 volts applied
> and it made no difference. I did remove all power long
> enough to replace the internal batteries. they were showing
> low charge ( 7.6 volts ) when I took it out of the case.
>
> Just curious if I've hit a button or something that is causing
> this behavior. I'm not finding anything in the manual that
> describes this issue. Didn't find anything on the internet
> relative to it. SO, thought I would ask you folks.
>
More information about the Elecraft
mailing list