[Elecraft] Balanced Mic to Unbalanced Connection Follow Up Question

[Tony]

On 6/11/2020 10:16 PM, Bob McGraw K4TAX wrote:

> a special thanks to you for reporting back to the group your findings 
> and results. 

Thanks for your input as well Bob. Lots of talented folks on the 
reflector who take the time to respond to questions. The least one can 
do is provide feedback.

Tony -K2MO

> Tony;
>
> Seems you have done an excellent job and things are working as you 
> expected.   And a special thanks to you for reporting back to the 
> group your findings and results.   I wish everyone did that. We'd all 
> be informed.
>
> 73
>
> Bob, K4TAX
>
>
> On 6/11/2020 8:00 PM, Tony wrote:
>> All:
>>
>> The K3S seems to work flawlessly with XLR cable connected to the rear 
>> panel mic input as per the groups recommendations. I have pins 1 and 
>> 3 connected to the sleeve of the 1/8" plug and pin 2 to the tip. I'm 
>> using a dynamic mic so the bias is turned off. This setup works fine 
>> on the KX3 as well.
>>
>> If anyone is interested, I have a brand new Heil XLR cable for the 
>> K3S that I won't be using.
>>
>> Thanks,
>>
>> Tony -K2MO
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dxdx at optonline.net