[Elecraft] Key Clicks

[David Gilbert]

QSK has everything to do with it.  If you hot switch the amp you create
sharp waveforms every element even if the K3 keying is soft.  The
discussion on the contesting forum included comments that the default
setting for TXDELAY on the K3 (apparently 008) isn't long enough and that
it should be set to 009.  Not sure which amps were being considered.

73,
Dave   AB7E

On Sat, Jun 6, 2020 at 5:40 PM John Simmons <jasimmons at pinewooddata.com>
wrote:

> I have operated a number of the 'big' CW contests. I have heard some
> really, really wide sigs with horrible key clicks. Yes they were
> strong.... but 10 KHz wide? Rob Sherwood and others have written about
> this. Some of the really high-end rigs (non-Elecraft) allow user
> adjustment of CW rise time to such short values that key clicks are
> guaranteed. Yech!
>
> -de John NI0K
>
> Fred Jensen wrote on 6/6/2020 7:05 PM:
> > True. TXDelay is a sequencing parameter to assure that downstream
> > switching has completed before RF appears. The keying waveform
> > [particularly the edges and "corners"] affect the sidebands and thus
> > bandwidth of the CW signal.  I don't believe QSK has anything to do
> > with it, at least for a K3.
> >
> > 73,
> > Fred ["Skip"] K6DGW
> > Sparks NV DM09dn
> > Washoe County
> >
> > On 6/6/2020 4:55 PM, N4ZR wrote:
> >> There's a big discussion going on in contesting circles online about
> >> the problem of key clicks.  There's been a lot of discussion about
> >> settings called things like TXDelay, but so far as I can tell (and
> >> the manual confirms), the K3's TX delay is intended to protect
> >> amplifier relays at the start of a transmission.  So long as you
> >> don't run QSK, I would think that setting would have no influence on
> >> key clicks after the rise of the first CW element.  True?
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to jasimmons at pinewooddata.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ab7echo at gmail.com